XenServer 7.0: clone USB (without removing)
-
What does dd do if you try it normally?
-
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
What does dd do if you try it normally?
dd worked fine if I was cloning an XS USB to another, mounted in a Linux environment.
-
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
What does dd do if you try it normally?
I just does not work.
We decided on the other thread because of /proc but then you said that was ridiculous or something.
But I think the answer is shut it down, clone the USB on another machine, then restart.
-
@DustinB3403 said in XenServer 7.0: clone USB (without removing):
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
What does dd do if you try it normally?
dd worked fine if I was cloning an XS USB to another, mounted in a Linux environment.
Does Linux not mount the XS boot media in the Dom0? If not, then I see the problem.
-
@BRRABill said in XenServer 7.0: clone USB (without removing):
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
What does dd do if you try it normally?
I just does not work.
We decided on the other thread because of /proc but then you said that was ridiculous or something.
Yes, once /proc was mentioned I assumed that the statement that it didn't work was moot because it meant something totally unrelated was attempted as /proc is not on the USB (or on anything) and would not be a factor. So that meant that imaging the USB stick had not been attempted yet.
-
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
What does dd do if you try it normally?
I just does not work.
We decided on the other thread because of /proc but then you said that was ridiculous or something.
Yes, once /proc was mentioned I assumed that the statement that it didn't work was moot because it meant something totally unrelated was attempted as /proc is not on the USB (or on anything) and would not be a factor. So that meant that imaging the USB stick had not been attempted yet.
I'm not saying I agreed with it.
I'm just saying it did not work.
-
@BRRABill said in XenServer 7.0: clone USB (without removing):
I'm just saying it did not work.
And I was just saying that it must not have been attempted given the error. Someone tried to dd something else instead of the USB stick.
-
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
I'm just saying it did not work.
And I was just saying that it must not have been attempted given the error. Someone tried to dd something else instead of the USB stick.
So, what command would you use to use dd to clone my running XS USB boot device?
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 447.1G 0 disk └─XSLocalEXT--40f7cced--9587--c38f--e152--057e4ec2b2d0-40f7cced--9587--c38f--e152--057e4ec2b2d0 253:0 0 447.1G 0 lvm /run/sr-mount/40f7cced-9587-c38f-e152-057e4ec2b2d0 sdb 8:16 0 149.1G 0 disk ├─sdb1 8:17 0 18G 0 part / ├─sdb2 8:18 0 18G 0 part ├─sdb3 8:19 0 512M 0 part ├─sdb5 8:21 0 4G 0 part /var/log └─sdb6 8:22 0 1G 0 part [SWAP] sr0 11:0 1 1024M 0 rom tda 254:0 0 100G 0 disk loop0 7:0 0 54.8M 1 loop /var/xen/xc-install [ -
I tried using dd on my lab, from /sda to /sdb files were copied, but the drive wasn't bootable.
I had to shutdown the host remove the drive and use dd on a separate linux system to create a working clone.
-
@DustinB3403 said in XenServer 7.0: clone USB (without removing):
I tried using dd on my lab, from /sda to /sdb files were copied, but the drive wasn't bootable.
I had to shutdown the host remove the drive and use dd on a separate linux system to create a working clone.
This was the thread.
https://www.mangolassi.it/topic/9425/cloning-xenserver-on-usb-or-sd/37
-
Said something about the partitioning layer being copied if you use /sda, but we never finished out that thread.
-
@BRRABill said in XenServer 7.0: clone USB (without removing):
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
I'm just saying it did not work.
And I was just saying that it must not have been attempted given the error. Someone tried to dd something else instead of the USB stick.
So, what command would you use to use dd to clone my running XS USB boot device?
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 447.1G 0 disk └─XSLocalEXT--40f7cced--9587--c38f--e152--057e4ec2b2d0-40f7cced--9587--c38f--e152--057e4ec2b2d0 253:0 0 447.1G 0 lvm /run/sr-mount/40f7cced-9587-c38f-e152-057e4ec2b2d0 sdb 8:16 0 149.1G 0 disk ├─sdb1 8:17 0 18G 0 part / ├─sdb2 8:18 0 18G 0 part ├─sdb3 8:19 0 512M 0 part ├─sdb5 8:21 0 4G 0 part /var/log └─sdb6 8:22 0 1G 0 part [SWAP] sr0 11:0 1 1024M 0 rom tda 254:0 0 100G 0 disk loop0 7:0 0 54.8M 1 loop /var/xen/xc-install [Which of those is the USB stick?
-
can you dd it to a file, then dd that file to a new USB stick?
-
@Dashrender said in XenServer 7.0: clone USB (without removing):
can you dd it to a file, then dd that file to a new USB stick?
Yes, dd to a file is how ISO files are made.
-
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
I'm just saying it did not work.
And I was just saying that it must not have been attempted given the error. Someone tried to dd something else instead of the USB stick.
So, what command would you use to use dd to clone my running XS USB boot device?
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 447.1G 0 disk └─XSLocalEXT--40f7cced--9587--c38f--e152--057e4ec2b2d0-40f7cced--9587--c38f--e152--057e4ec2b2d0 253:0 0 447.1G 0 lvm /run/sr-mount/40f7cced-9587-c38f-e152-057e4ec2b2d0 sdb 8:16 0 149.1G 0 disk ├─sdb1 8:17 0 18G 0 part / ├─sdb2 8:18 0 18G 0 part ├─sdb3 8:19 0 512M 0 part ├─sdb5 8:21 0 4G 0 part /var/log └─sdb6 8:22 0 1G 0 part [SWAP] sr0 11:0 1 1024M 0 rom tda 254:0 0 100G 0 disk loop0 7:0 0 54.8M 1 loop /var/xen/xc-install [Which of those is the USB stick?
I figured you'd know!
/sdb
/sdb1 is the 18GB XenServer host control domain (dom0) partition
/sdb2 is the backup parittion
/sdb3 is the UEFI boot partition
/sdb5 is the logs partition
/sdb6 is the swap partition -
-
@BRRABill said in XenServer 7.0: clone USB (without removing):
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
I'm just saying it did not work.
And I was just saying that it must not have been attempted given the error. Someone tried to dd something else instead of the USB stick.
So, what command would you use to use dd to clone my running XS USB boot device?
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 447.1G 0 disk └─XSLocalEXT--40f7cced--9587--c38f--e152--057e4ec2b2d0-40f7cced--9587--c38f--e152--057e4ec2b2d0 253:0 0 447.1G 0 lvm /run/sr-mount/40f7cced-9587-c38f-e152-057e4ec2b2d0 sdb 8:16 0 149.1G 0 disk ├─sdb1 8:17 0 18G 0 part / ├─sdb2 8:18 0 18G 0 part ├─sdb3 8:19 0 512M 0 part ├─sdb5 8:21 0 4G 0 part /var/log └─sdb6 8:22 0 1G 0 part [SWAP] sr0 11:0 1 1024M 0 rom tda 254:0 0 100G 0 disk loop0 7:0 0 54.8M 1 loop /var/xen/xc-install [Which of those is the USB stick?
I figured you'd know!
/sdb
/sdb1 is the 18GB XenServer host control domain (dom0) partition
/sdb2 is the backup parittion
/sdb3 is the UEFI boot partition
/sdb5 is the logs partition
/sdb6 is the swap partitionYou have to clone the entire drive though, you can't just pick and chose. Otherwise it's not cloning a working, bootable drive, just a partition on the drive.
-
@DustinB3403 said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
@scottalanmiller said in XenServer 7.0: clone USB (without removing):
@BRRABill said in XenServer 7.0: clone USB (without removing):
I'm just saying it did not work.
And I was just saying that it must not have been attempted given the error. Someone tried to dd something else instead of the USB stick.
So, what command would you use to use dd to clone my running XS USB boot device?
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 447.1G 0 disk └─XSLocalEXT--40f7cced--9587--c38f--e152--057e4ec2b2d0-40f7cced--9587--c38f--e152--057e4ec2b2d0 253:0 0 447.1G 0 lvm /run/sr-mount/40f7cced-9587-c38f-e152-057e4ec2b2d0 sdb 8:16 0 149.1G 0 disk ├─sdb1 8:17 0 18G 0 part / ├─sdb2 8:18 0 18G 0 part ├─sdb3 8:19 0 512M 0 part ├─sdb5 8:21 0 4G 0 part /var/log └─sdb6 8:22 0 1G 0 part [SWAP] sr0 11:0 1 1024M 0 rom tda 254:0 0 100G 0 disk loop0 7:0 0 54.8M 1 loop /var/xen/xc-install [Which of those is the USB stick?
I figured you'd know!
/sdb
/sdb1 is the 18GB XenServer host control domain (dom0) partition
/sdb2 is the backup parittion
/sdb3 is the UEFI boot partition
/sdb5 is the logs partition
/sdb6 is the swap partitionYou have to clone the entire drive though, you can't just pick and chose. Otherwise it's not cloning a working, bootable drive, just a partition on the drive.
That's what I thought, but @scottalanmiller said that also copies the partitioning scheme. Which I thought you would want, but it sounded negative.
-
Can we pick this discussion back up?
Maybe explain what you meant by:
"You have to copy what there is to where you want it. If the filesystem is on /dev/sda1 you don't want /dev/sda or you are copying the partitioning layer with it." -
@BRRABill said in XenServer 7.0: clone USB (without removing):
Can we pick this discussion back up?
Maybe explain what you meant by:
"You have to copy what there is to where you want it. If the filesystem is on /dev/sda1 you don't want /dev/sda or you are copying the partitioning layer with it."Correct. /dev/sda1 is a single partition. /dev/sda is a full device. If you dd /dev/sda, you are getting the entire device, including the partition table. If you dd /dev/sda1 you are only getting the contents of the one partition.
