Intermittent Scan to email funcitonality
-
While I'd love to think that, each protocol does its own thing.. SMTP and RDP who knows, I've seen stranger things happen.
-
Check firewall rules. That's the only other thing I can think of. If it's not DNS, and other services are having no issues over the VPN, check the firewall. See if it's blocking it for some odd reason. Even add a manual exception if you have to.
-
@ajstringham said:
Check firewall rules. That's the only other thing I can think of. If it's not DNS, and other services are having no issues over the VPN, check the firewall. See if it's blocking it for some odd reason. Even add a manual exception if you have to.
It works sometimes. That is not a firewall rule to me, but I have looked. There are no rules that would block port 25 being applied to this IP. Even if their was, they would make the NAS not work also. Here is a screenshot of the NAS and the HP in one location. One works one does not.
Note the IP, they are both in the same place. sitting right next to each other in fact. Yet one works everytime (NAS) while the other only works sometimes (HP).
-
The HP Event log shows the servier is unavailable. Yet it is obviously available because the NAS works.
-
The router does have a rule to block SMTP unless it is bound for 10.202.1.14
I can watch the allow stats increment when I send a successful email from the NAS and on the rare times that the HP sends. But when the HP fails, the Deny rule does not change. It is not being hit.
-
For troubleshooting, I also created an new allow rule on the Windows firewall of the exchange server. Again should not be relevant because the NAS works, but still.
Not showing each tab, but basically allow all port 25 from any remote IP to any local IP.
-
The receive connectors allow the entire remote subnet at the moment. I originally had it set to the various printer's specific IP.
I move the networks between auth and anon as needed when testing.
-
Ok, I am thinking that you need to see if there is a firmware update for the printers. Can you get us the firmware it's on, and we'll see if it's on the latest version? Maybe it's a bug that got worked out.
-
@ajstringham said:
Ok, I am thinking that you need to see if there is a firmware update for the printers. Can you get us the firmware it's on, and we'll see if it's on the latest version? Maybe it's a bug that got worked out.
All printers are now on current firmware as of last week. HP support already went down that route. Sorry for not mentioning that already. They were only one rev behind anyway.
-
@JaredBusch said:
@ajstringham said:
Ok, I am thinking that you need to see if there is a firmware update for the printers. Can you get us the firmware it's on, and we'll see if it's on the latest version? Maybe it's a bug that got worked out.
All printers are now on current firmware as of last week. HP support already went down that route. Sorry for not mentioning that already. They were only one rev behind anyway.
Hmmm....I can't remember. Did you run a continuous ping test against it when you were testing SMTP? Could you have some bad JetDirect cards?
-
Yes, I had a ping 10.202.10.20 -t running from the mail server for the last 5 days.
-
@Dashrender asked earlier about them being on the same switch. Could there be a middleman networking device killing the connection somewhere? An L3 switch or something similar?
-
@ajstringham said:
@Dashrender asked earlier about them being on the same switch. Could there be a middleman networking device killing the connection somewhere? An L3 switch or something similar?
@JaredBusch said:
The conneciton from the main office to the branch offices are all OpenVPN site to site tunnels using Ubiquiti EdgeMax LITE routers. Everything has worked fine for 2 years. Suddenly a week and a half ago, we started having problems.
-
@JaredBusch said:
@ajstringham said:
@Dashrender asked earlier about them being on the same switch. Could there be a middleman networking device killing the connection somewhere? An L3 switch or something similar?
@JaredBusch said:
The conneciton from the main office to the branch offices are all OpenVPN site to site tunnels using Ubiquiti EdgeMax LITE routers. Everything has worked fine for 2 years. Suddenly a week and a half ago, we started having problems.
So these are plugged directly into the router?
-
@ajstringham said:
So these are plugged directly into the router?
They are plugged into an HP 1910-24 PoE switch at their respective branch office
Printing works fine. Scan to network folder works fine. Email works sometimes. -
Just setup an old MFP at one of the offices. It sent emails without error.
-
@JaredBusch said:
@ajstringham said:
So these are plugged directly into the router?
They are plugged into an HP 1910-24 PoE switch at their respective branch office
Printing works fine. Scan to network folder works fine. Email works sometimes.Use authentication for all of them. You said you have to go back and forth between auth and anon to get it to work. It sounds like a permissions issue, of some sort, to me. With what I know now, it's something on Exchange doing this. I'm just not familiar enough with Exchange on-premise to be of much use there.
-
Can you post a screenshot of the HP's SMTP settings?
-
We haven't seen that yet, so that'd be helpful.
-
Some HP printers print through an HP service.. any chance that's the case here, it's not actually sending email directly from the device, but instead it's coming through HP's cloud? and there might be a problem there?
