What does Internal Error: Missing Template ERR_CONNECT_FAIL mean??
-
-
@thecreativeone91
Installed, and here is the error I receive:
[Fiddler] The connection to 'mailchimp.com' failed.
Error: TimedOut (0x274c).
System.Net.Sockets.SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 205.201.132.123:80I should note that restarting my maraki MX80 solves the issue for about 5 minutes, which is when this error begins happening again.
-
@bigj6360 said:
@thecreativeone91
Installed, and here is the error I receive:
[Fiddler] The connection to 'mailchimp.com' failed.
Error: TimedOut (0x274c).
System.Net.Sockets.SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 205.201.132.123:80I should note that restarting my maraki MX80 solves the issue for about 5 minutes, which is when this error begins happening again.
Sounds like the firewall is either dropping packets or your Internet Modem/Media Converter. You might want to contact Cisco/Meraki.
-
If you have Meraki and it is working there must be a support contract. They should be able to sort this out for you.
-
I found this thread by google and I think it needs an update. If you are doing a site to site VPN on over non-Meraki VPN peers or Meraki to Meraki across two organisations because the self config does not work you will get the Missing Template ERR_CONNECT_FAIL if you have under,
Security appliance/ Content filtering - Web search filtering enabled. Disabling this option will re enable port 80 over the VPN.
This seems to only apply to Organization-wide settings and not Meraki Site-to-site VPN on the VPN side. It has also been reported on rear occasions to apply to outside DNS.
-
Meraki is definitely a device type that needs to be kept very up to date.
-
@minitrucker007 Thanks for popping in!
-
@minitrucker007 - Thanks! This resolved my issue as well. Don't exactly like that I had to disable this 'feature' in order to resolve this though. I'll contact Meraki to see if there is something else that can be done about this.
-
@Phenix51 glad to see that it helped someone else!
-
@Phenix51 Welcome to the MangoLassi community!!
-
Techie4Life here SAM (SW community member). I actually had the same problem and minitrucker007's solution did work and Meraki still hasn't fixed the issue. I'll try engaging with Meraki and see if they can actually look at this and fix it.
For reference I have a Site-to-Site Meraki-Meraki VPN running and I had Web Search Filtering enabled.
-
@veggoku Welcome to MangoLassi!! Awesome to see you over here, too!
-
@scottalanmiller Thanks, funny that I would find you somewhere else online :p.
-
@veggoku said:
@scottalanmiller Thanks, funny that I would find you somewhere else online :p.
This is actually where I am most of the time
-
@veggoku said:
Techie4Life here SAM (SW community member). I actually had the same problem and minitrucker007's solution did work and Meraki still hasn't fixed the issue. I'll try engaging with Meraki and see if they can actually look at this and fix it.
For reference I have a Site-to-Site Meraki-Meraki VPN running and I had Web Search Filtering enabled.
I had this same issue today. I took a new Meraki MX64 home with me to connect it back to our HQ's ASA 5510 on a site-to-site VPN. Connecting the two was pretty easy, but once the tunnel was up, I ran into the Missing Template error when trying to connect to our corporate intranet site from behind the MX64.
The fix mentioned above worked for me as well (disable Web Search Filtering). Thanks for posting the fix here.
-
It should also be noted this specific post is the first Google search result when searching for Internal Error: Missing Template ERR_CONNECT_FAIL. Yay for MangoLassi!
-
Good I am glad my research is fixing this problem for others. Don't forget to create a ticket with Meraki and not just fix the problems the bigger the problem the sooner they will release a fix for it.
-
disable the web cache worked for me.
-
MERAKI option worked ,good advise
-
@smartkid808 I know this is a old thread, but I thought I'd mention that there is forticlient. It's free for the endpoint program, the management server is what you have to pay for. http://forticlient.com/
